Varispeed pitch – Tascam IF-DM User Manual

Page 25

Please note that when running at these track count and sampling
rates, some DAW software will hit a limit in terms of hard disk
throughput before the driver or FireWire limits are reached. Please
experiment with hard disk caching and read-ahead settings if you
are experiencing drop-outs or unexpected stops in playback. This is
especially noticeable with slower hard drives, such as the ones
found in the Apple Mac Mini and notebook computers in general.

Varispeed pitch

The DM-3200 and DM-4800 can run at non-standard Sample
Rates when locked to an external clock.
The IF-FW/DM

II will attempt to follow along, but it has lower

limits than the host mixer.
Here are the supported pitch ranges.

• 44.1kHz

: -3.0% to +3.0%

• 48kHz

: -3.0% to +3.0%

• 88.2kHz

: -1.0% to +1.0%

• 96kHz

: -1.0% to +1.0%

Outside of these ranges, the audio may become distorted, or the
mixer will report “Driver not locked”, with the audio muted.

This manual is related to the following products:

IF-FW