Tascam IF-DM - Manual (Page 11)

11
1. Launch the installer and carefully follow the on-screen
instructions in the Installation Wizard.
2. When presented with any Windows Logo warnings, click
Continue Anyway.
3. The driver installer ends with “please restart this
computer”. You will need to restart to finish the installation
process.
4. You can connect the FireWire cable after the computer has
restarted.
5. If you connected the FireWire cable with the power off,
then the “New Hardware Wizard” will appear immediately
after the restart. Otherwise it will appear as soon as you
connect the cable after restarting.