Qwest SCP-3200 - Manual (Page 118)

102 Section 2F: Using Contacts
Assigning an Image to a Contacts Entry
You can assign an image to a Contacts entry. The image is displayed when
the entry calls you.
To assign an image for an entry:
1. Select > Contacts > Find/Add Entry.
2. Select the Contacts entry for which you want to assign the image and
press .
3. Select a phone number, and then select Options (right softkey) >
Edit; or if you are selecting an item other than the phone number,
select Edit (right softkey).
4. Press the navigation key up to highlight the icon and press .
5. Select an image and press .
6. Press Save (left softkey) to save the image type.
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can identify the caller
by the ringer type. (See “Ringer Types” on page 46.)
To select a ringer type for an entry:
1. Select > Contacts > Find/Add Entry.
2. Select the Contacts entry for which you want to set the incoming
ringer and press
.
3. Select a phone number, and then select Options (right softkey) >
Edit; or if you are selecting an item other than the phone number,
select Edit (right softkey).
4. Scroll down to and press .