Sony DPP-MP1 - Manual (Page 30)

30 GB
Folder number/file number error display
When a hyphen [-] appears in the folder number/file number display area when a
folder number or file number is selected or while printing an image with the Print
Mark, conditions indicated are corresponding remedies are as follows.
Condition Meaning and remedy
• You cannot select the image for printing. Or,
there are duplicate folder numbers.
c Image cannot be printed due to a problem
with the image folder number.
• You cannot select an image for printing. Or,
there are duplicate file numbers.
c Image cannot be printed due to a problem
with the image file number.
• The image has a Print Mark, but it cannot be
printed using this unit.
c The image file is corrupt and cannot be
printed. When this error occurs while
printing an image that has a Print Mark,
printing is suspended. To start printing the
next image, press PRINT/STOP.
Folder number
File number
Warning Messages
Messages that may appear on the display are listed and explained in the table below.
Message Meaning
WAIT
RIBON
PAPER
• Printing was stopped.
c The indication is shown while the last image is
being printed. When the image is finished, the
indication “STOP” is shown briefly and then goes
out.
• The temperature inside the printer is too high, and
printing has been temporarily disabled.
c Wait until printing resumes automatically.
• No print cartridge is inserted, or the print cartridge is
used up.
c Insert or replace the print cartridge (page 10).
• No paper tray is inserted, or the print paper is used up.
c Insert a paper tray loaded with paper (page 11).