Connect to the computer/network – Oki PM4410 User Manual
Page 18

E-16
Pacemark 4410 Setup Guide
Connect to the Computer/Network
Connecting the Parallel Port
The parallel port is a standard IEEE-1284-compatible,
36-pin port. It requires a shielded IEEE-1284-compatible,
bi-directional cable no longer than 6 ft. (1.8 m).
1. Open the port access cover.
2. Plug the interface cable into the parallel port and secure it with the
wire loops.
3. Close the port access cover, and attach the other end of the cable to
the computer and secure it with the screws.
Default settings for the parallel interface (see Section 1 of
your on-line Pacemark 4410 User’s Guide for information on
changing Menu settings):
I Prime = Buffer Print
Pin 18 = +5V
Auto Feed XT = Invalid (Epson FX emulation only)
BiDirection = Enable
See also other documents in the category Oki Printers:
- C6050 (40 pages)
- B 6200 (32 pages)
- C5540MFP (1 page)
- C3530MFP (138 pages)
- B4545 MFP (154 pages)
- B4600 Series (104 pages)
- C5250 (83 pages)
- C 7300 (12 pages)
- C 5200n (82 pages)
- 5650 (2 pages)
- B6000 (6 pages)
- PRINTING SOLUTION B2400 (36 pages)
- B6000 Series (8 pages)
- B4000 (2 pages)
- 520 (68 pages)
- C5000 (6 pages)
- 80 Series (97 pages)
- Pos 407II (65 pages)
- OFFICE 87 (40 pages)
- C5900n (6 pages)
- LAN 510W (44 pages)
- 490 (94 pages)
- B 410d (84 pages)
- 42625502 (1 page)
- 84 (99 pages)
- 3391 (35 pages)
- C 130n (172 pages)
- C8800 (179 pages)
- C8800 (87 pages)
- B8300 (95 pages)
- 390 (135 pages)
- 390 (131 pages)
- ES3640E (220 pages)
- ES3640E (24 pages)
- 1220n (207 pages)
- C5200 (2 pages)
- OFFICE 86 (4 pages)
- CX 1145 MFP (177 pages)
- 8c Plus (24 pages)
- 2024/2024e (260 pages)
- FAX 740 (80 pages)
- PRINTER MPS420B (74 pages)
- C 7200 (2 pages)
- B4000 Series (2 pages)
- 2500 (80 pages)