Speaker package – Onkyo HT-S7300 User Manual

Page 10

Speaker Package

For detailed information, see the pages in parentheses.

Standby/On indicator

With the Auto Standby function, the SKW-770/780
automatically turns on when an input signal is
detected in Standby mode. When there’s no input sig-
nal for a while, the SKW-770/780 automatically enters
Standby mode.

OUTPUT LEVEL control (

➔

25)

This control is used to adjust the volume of the sub-
woofer.

LINE INPUT (

➔

17)

This RCA input should be connected to the SUB-
WOOFER PRE OUT on the AV receiver with sup-
plied RCA cable.

Note

• The Auto Standby function turns the subwoofer on when the

input signal exceeds a certain level. If the Auto Standby function
does not work reliably, try slightly increasing or decreasing the
subwoofer output level on the AV receiver (

➔

42).

■

HTP-680 (SKF-680, SKC-680, SKR-680, SKB-680)

Subwoofer (SKW-770/780)

To AC outlet

■

Front

■

Rear

Red:

Subwoofer in standby mode

Blue:

Subwoofer on

Front, Center, Surround and Surround Back Speakers

SKF-680

SKR-680/SKB-680

SKC-680

Front

Rear

Front

Rear