Onkyo TX-NR3008 - Manual (Page 49)

49
En
Note
• For composite video, S-Video, and component video upconver-
sion for the HDMI output, the “Monitor Out” setting must be
set to other than “Analog” (
➔ 47), and the “HDMI Input” set-
ting must be set to “- - - - -”. See “Video Connection Formats”
for more information on video signal flow and upconversion
(
➔ 25).
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of “Component Video Input”.
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “Digital
Audio Input” (
➔ 50). In this case, if you want to use the coaxial
or optical audio input, make the selection in the “Audio Selec-
tor” in the Home menu (
➔ 68).
• “TUNER” selector cannot be assigned and is fixed at the
“- - - - -” option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to “PORT” selector.
• Do not assign the component connected with the HDMI input to
“TV/CD” selector when you set “TV Control” setting to “On”
(
➔ 65). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign “IN 2” to
the “BD/DVD” input selector.
If you’ve connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
verted
* and output by the COMPONENT VIDEO MONI-
TOR OUT *1 . You can set this for each input selector by
selecting the “- - - - -” option.
*1 This applies only when “Monitor Out” setting is set to “Ana-
log” (
➔ 47).
Here are the default assignments.
■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,
TAPE, TV/CD, PHONO, PORT
`
IN 1, IN 2, IN 3:
Select a corresponding component video input that
the video component has been connected.
` - - - - -:
Select if you are using HDMI output, rather than the
COMPONENT VIDEO MONITOR OUT, for the
output from composite video, S-Video, and compo-
nent video sources.
Note
• For composite video and S-Video upconversion for the COM-
PONENT VIDEO MONITOR OUT, the “Monitor Out” set-
ting must be set to “Analog” (
➔ 47), and the “Component
Video Input” setting must be set to “- - - - -”. See “Video Con-
nection Formats” for more information on video signal flow and
upconversion (
➔ 25).
• If not connected to the same output you have selected in the
“Monitor Out” setting, the “Monitor Out” setting will be auto-
matically switched to “Analog” (
➔ 47).
• “TUNER” selector cannot be assigned and is fixed at the
“- - - - -” option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to “PORT” selector.
Input selector Default assignment
BD/DVD IN 1
VCR/DVR - - - - -
CBL/SAT IN 2
GAME IN 3
PC - - - - -
AUX - - - - -
TAPE - - - - -
TUNER - - - - - (Fixed)
TV/CD - - - - -
PHONO - - - - -
PORT - - - - -
IN
OUT
Composite video, S-Video
Composite video, S-Video
Component video
Component video