Turning on & basic operations, Turning on/off the av receiver, Turning on – Onkyo TX-NR3008 User Manual
Page 27: Turning off, Turning on turning off, Tton
27
En
Turning On & Basic Operations
Turning On/Off the AV Receiver
(European and Asian models)
To completely shut down the AV receiver, set POWER to the OFF position (
).
Turning On
1
(European and Asian models)
Set
POWER to the ON position (
) on the front panel.
The AV receiver enters Standby mode, and the STANDBY indicator comes on.
2
Press
ON/STANDBY on the front panel.
or
Press
RECEIVER followed by ON on the remote controller.
The AV receiver comes on, the display lights, and the STANDBY indicator goes off.
Pressing the remote controller’s ON again will turn on any components connected via
.
Turning Off
Press
ON/STANDBY on the front panel.
or
Press
RECEIVER followed by STANDBY on the remote controller.
The AV receiver will enter Standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
STANDBY
ON
RECEIVER
ON/STANDBY
ON/STANDBY
POWER
STANDBY indicator
(North American models)
STANDBY indicator
(European and Asian models)