One for All URC 4080 - Manual (Page 3)

Key Charts
Use SET for all programming
sequences.
The LED (red light) blinks to show that
the remote control is working and is
sending signals.
Use M.POWER to set up and turn on (or
off) all your video components with a
single key.Also see page 25.
Press POWER once to turn on (or off)
a selected home entertainment
component.
Press TV, DVD, VCR, or CBL/SAT once
to select a home entertainment video
component to control.
Use the F1, F2, F3, or F4 keys
to program macros.Also see page 30.
Use EXIT to exit out of your cable
converter’s menu and guide.
Press MENU once to display the selected
component’s screen menu. Use the VOL
+/- and CH +/- keys to navigate menus
and press the MUTE key to select items.
Press TV/VID to switch viewing between
TV and video sources.
Use VOL + (or VOL -) to raise (or lower)
the sound volume.
Use CH + (or CH -) to select the next
higher (or lower) channel.
Press MUTE/SELECT once to turn sound
off or on.Also, use MUTE/SELECT to
select items from the selected
component’s screen menu after
pressing MENU once.
After pressing MENU, use the Cursor
Keys to move the cursor in the program
guide and menu screens.
continued on next page...
5
FEATURES AND FUNCTIONS
Use the illustration below to locate One For All 4-Device
Video Expert remote control features and then study the Key
Charts (on the next two pages) to learn how they function.
4