Programming dvd player control, Setup codes for cable converters (continued), Setup codes for satellite receivers – One for All URC 4080 User Manual
Page 11
PROGRAMMING DVD PLAYER CONTROL
Locate the brand name of your DVD (or LD) player in the
Setup Codes For DVDs (or LDs) section on the next page,
and write it in the following space.
DVD (or LD) Brand: __________________________
The brands are listed in alphabetical order with the
most popular codes listed first. To program DVD (or LD)
player control:
1.
Turn on your DVD (or LD) player.
2.
On the remote control, press DVD once.
Press and hold SET until the LED blinks twice,
then release SET.
NOTE: The remote control will exit programming if
more than 10 seconds elapse between key presses.
3.
Enter the first four-digit code for your DVD (or
LD) player. If you perform this procedure cor-
rectly, the LED will blink twice.
NOTE: If the LED emits a long blink, the code is
invalid. Repeat steps 2 through 3 and try entering the
same code again.
4.
Aim the remote control at your DVD (or LD)
player and press POWER once. The unit should
turn off. If your DVD (or LD) player remote
control does not have a POWER key, press
PLAY. If the DVD (or LD) player does not
respond, repeat steps 2-3, trying each code list-
ed for your brand until you find one that works.
If the DVD (or LD) player still does not work ,
try searching for the code (see Searching For
Your Code on page 23).
5.
Write your DVD (or LD) player code in the
boxes below for future reference.
NOTE: Remember, to use the One For All 4-Device Video Expert
remote control to operate your
DVD (or LD) player
, press DVD first.
21
PROGRAMMING CABLE CONVERTER OR
SATELLITE RECEIVER CONTROL
Setup Codes for Cable Converters (Continued):
Samsung 0144, 0040
Scientific Atlanta
0008, 0477, 0017, 0877
Signal
0015, 0040
Signature
0011
Sprucer
0021
Starcom
0003, 0015
Stargate
0015, 0040, 0797
Starquest
0015
TV86
0063
Tandy
0258
Teleview
0040
Timeless
0418
Tocom 0012, 0013
Toshiba
0000
Tusa
0015
Unika
0153, 0022
United Artists
0007
Universal
0153, 0022, 0056, 0191
Viewstar
0063, 0258
Zenith 0000, 0525, 0899
Zentek
0400
Setup Codes for Satellite Receivers:
AlphaStar
0772
Echostar
0775, 1005
Expressvu
0775
General Instrument
0627, 0361, 0869
HTS
0775
Hitachi
0819
Hughes Network
0749
JVC
0775
Jerrold
0627, 0361
Magnavox
0724, 0722
Memorex
0724
Next Level
0869
Panasonic
0701
Philips
0724, 0722
Primestar
0627, 0361
RCA
0566, 0143, 0392, 0855
Radio Shack
0869
Sony
0639
Star Choice
0869
Toshiba
0790
Uniden
0724, 0722
Zenith
0856
20