Optoma TSFN-IR01 - Manual (Page 39)

English
User Controls
click Change settings of this
connection.
Step 4: On the General tab, under This
connection uses the following
items, click Internet Protocol
( T C P / I P ) , a n d t h e n c l i c k
“Properties.”
Step 5: Click Use the following IP
address, and type in as below:
1) IP address: 192.168.0.250
2) Subnet mask: 255.255.255.0
3) Default gateway: 168.0.254.192
Step 6: To open Internet Options, click
IE web browser, click Internet
Options, click the Connections tab
and click “LAN Settings...”
Step 7: The Local Area Network (LAN)
Setting dialog box appears, In
the Proxy Server area, cancel the
Use a proxy server for your LAN
check box., then click “OK” button
twice.
Step 8: Open your IE and type in the IP
address of 192.168.0.250 in the
URL then press “Enter” key. The
web page will display as below:
Step 9: Open “Control Panel” to control
your projector.
Step 2: Select apply and press “Enter” button to submit function or press “menu” key to
exit.
Step 3: To open Network Connections, click Start, click Control Panel, click Network
and Internet Connections, and then click Network Connections. Click the
connection you want to configure, and then, under Network Tasks ,