Oki B 4300 - Manual (Page 62)

OPERATION > 62
Advanced tab
1. You can specify which times of day your printer will be
available.
2. Indicates current priority, from 1 (lowest) to 99 (highest).
Highest priority documents will print first.
3. Specifies that documents should be spooled (stored in a
special print file) before being printed. The document is then
printed in the background, allowing your application program
to become available more quickly. Options follow:
This specifies that printing should not start until the last page
has been spooled. If your application program needs a lot of
time for further computation in the middle of printing, causing
the print job to pause for more than a short period, the printer
could prematurely assume that the document has finished.
Selecting this option would prevent that situation, but printing
will be completed a little later, as the start is delayed.
This is the opposite choice to the one above. Printing starts as
soon as possible after the document begins spooling.
1
2
3
5
6
7
8
9
10
4