Oki B 4300 - Manual (Page 50)

OPERATION > 50
PCL emulation
The tabs available are the Setup Tab, the Job Options Tab and the
Image Tab.
Setup tab.
1. Paper size should be the same as the page size of your
document (unless you wish to scale the printout to fit another
size), and should also be the same as the size of paper you will
feed into the printer.
2. You can choose the source of the paper to feed, which may be
Tray 1 (the standard paper tray), Manual Feed, Tray 2 (if you
have the optional second paper tray installed) or the optional
multipurpose feeder. You can also click on the appropriate part
of the screen graphic to select your preferred tray.
If you select manual, the Weight selection box becomes visible.
You can leave the setting at Printer Setting or select as
required.
3. A variety of document finishing options can be selected, such
as normal one page per sheet, or N-up (where N can be 2 or 4)
for printing scaled down pages at more than one page per
sheet.
1
2
3
4
5