Oki C710n - Manual (Page 54)

54 – C710n User’s Guide
USB Setup
This menu controls the operation of the printer’s USB data
interface.
When you have changed any settings in the USB MENU, turn the
printer OFF, then ON again.
Ack / Busy
Timing Ack In Busy
/
Ack While
Busy
Sets the order to output the BUSY and
ACK signal for compatible reception.
I-prime Disable/
3µsec/50µsec Sets time to enable/disable I-prime signal
Offline
Receive Enable /
Disable To Enable/disable of this function. When
set to Enable, the interface retains a
receive possible state even when switching
to Offline. Interface sends the BUSY signal
only when the receive buffer is full or a
service call occurs.
ITEM SETTINGS EXPLANATION
Usb Enable /
Disable ENABLES / DISABLES the USB port.
Speed 12 / 480
Mbps Selects the interface speed. After setting
change the menu, the
printer restarts on exit.
Soft
Reset Enable /
Disable Enables or disables the SOFT RESET command.
Offline
Receive Enable /
Disable OFFLINE RECEIVE.
Serial
Number Enable /
Disable Specifies whether to ENABLE or DISABLE a USB
serial number.
The USB serial number is used to identify the
USB device connected to your PC.
ITEM SETTINGS EXPLANATION