Oki 58374501 - Manual (Page 6)

6
3. Place the finisher cover near the back of the
finisher. Locate the tab ( ! ) on the right side of
the cover.
4. Hold the clear band perpendicular to the cover
and slip one end over the tab ( ! ), then pivot
the band 90 degrees ( " ) so that it is aimed
toward the finisher:
5. Slip the other end of the band ( ! ) through
the retainer on the finisher and secure it
with the small stopper (
" ).
6. Place the large stopper over the tab on the
cover and turn it to lock it in position.
7. Attach the cover to the finisher and close it.