Omron Healthcare HBF-306 - Manual (Page 13)

How to Measure
13
How to Measure
Push
6) Hold the electrodes with both hands.
The unit automatically detects that
it is held and starts measurement.
The display flashes one by one
and moves to the right end.
The BMI judgment bar turns on immediately
after the body fat percentage and the
BMI are displayed. (The bar at the
right end flashes). You can start another
measurement when the
indicator turns on.
For how to interpret the measurement results
in detail, please refer to the following page.
7) Push the On/Off button
to turn the power off.
If you do not push the On/Off button, the unit will turn
off automatically in approximately three minutes after
displaying the measurement results.
Measuring postures that should be
avoided
Measurement in the following positions may
not provide accurate measurement.
How to hold the grips.
In the following cases, the electric resistance
may not be measured correctly.
Elbows are bent. Your fingers are apart from the grips.
When holding the grips,
the hands are positioned
unevenly towards the
top or the bottom
of the electrodes.
Arms are positioned
too upward or
downward of the
desirable angle
to the body.
Measuring while
lying down or sitting
Moving your body
or arms during
measurement