Oricom ECO90 - Manual (Page 14)

12 CALLER ID OPERATION
Caller ID Service
The caller’s information will be displayed and recorded if
YOU
When the telephone rings, the caller’s information will be
DISPLAYED
Note:
If the caller number is the same as one of phonebook
memory, the matched name stored in the phonebook
memory will be displayed.
The handset will prompt user if there is a missed call. When
the handset is in standby mode, “
” will be displayed prior
to other display information.
If all the missed calls are reviewed, the display “ ” will
disappear.
Call waiting
9OU
1. Press [ ] to wait for dial tone then Press [ ] [ 4 ]
[ 3 ] [ ].
].
Take two different calls at the same time
If you have subscribed to your telephone network operators
#ALL
$URING
1. When the handset receives a second call, the number
of the caller appears on the display. It will display for 20
seconds or until you press a key on the phone. Press
[
] to listen for dial tone then Press [ 2 ] to put the
current call on hold and talk with the second caller.
] to listen for dial tone
then Press [ 2 ] will toggle you between these 2 callers.