8basic operation, Make a call, Pre-dialling – Oricom ECO90 User Manual
Page 10: Adjust the receiver and speakerphone volume, Answer a call, Auto answer
8
BASIC OPERATION
Make a Call
1.
Press the [
] or [
] key, wait for a dial tone, then
dial the desired number.
2.
After finishing the conversation, press [
] key or
place the cordless handset into the charger.
The talk timer will be shown during talk.
Note:
In standby mode press and holding [
] or [
] for 1.5
seconds, the number associated with the [
] or [
]
key will dial out.
Pre-dialling
1.
When the handset is in standby mode, input the desired
number.
2.
Press [
] key to cancel the wrong digit, input the
correct one again. If a pause is needed during dialling,
press and hold [
] key for a while and character “P”
will be shown. A 3 seconds pause will be added while
dialling.
3.
Press the [
] or [
] key, the number will be
automatically dialled out.
4.
After finishing the conversation, press [
] key or
place the cordless handset into the charger.
The talk timer will be shown during talk.
Adjust the Receiver and Speakerphone
Volume
7HILE
Answer a Call
7HEN
1.
Press the [
] or [
] key to answer a call.
2.
After finishing the conversation, press [
] key or
place the cordless handset into the charger cradle.
Auto Answer
1.
If you turn on the “AUTO TALK”, you just need to pick
up the cordless handset from the charger cradle to
answer the call directly, needn’t press [
] or [
]
key.
2.
After finishing the conversation, press [
] key or
place the cordless handset into the charger cradle.