Optoma RMC-25key - Manual (Page 39)

39
English
User Controls
Step 3: To open Network Connections, click Start, click Control Panel, click Network
and Internet Connections, and then click Network Connections. Click the
connection you want to confi gure, and then, under Network Tasks , click
Change settings of this connection.
Step 4: On the General tab, under This connection uses the following items, click
Internet Protocol (TCP/IP), and
then click “Properties.”
Step 5: Click Use the following IP
address, and type in as below:
1) IP address: 192.168.0.100
2) Subnet mask: 255.255.255.0
3) Default gateway: 192.168.0.1
Step 6: To open Internet Options, click
IE web browser, click Internet
Options, click the Connections tab
and click “LAN Settings...”
Step 7: The Local Area Network (LAN)
Setting dialog box appears, In
the Proxy Server area, cancel the
Use a proxy server for your LAN
check box., then click “OK” button
twice.
Step 8: Open your IE and type in the IP
address of 192.168.0.100 in the
URL then press “Enter” key. The
web page will display as below:
Step 9: Open “Control Panel” to control
your projector.