Optoma RMC-25key - Manual (Page 34)

34
English
User Controls
Setup | Security
■ First Time:
1. The Password is 4 digits, DEFAULT VALUE is “1234”. (first time)
2. Use number buttons on the remote to select your password, and then
press “Enter” key to confirm your selection.
Change Password
1. Press “Enter” to input old password.
2. Use number button to enter current password, and then
press “Enter” key again to reveal next OSD menu.
3. Scroll down to highlight Password, and then press
“Enter” to activate.
4. Enter new password (4 digits in length) using the
number buttons on the remote, then press “Enter” to
confirm.
5. Enter new password again and press “Enter” to confirm.