Optoma RMC-25key - Manual (Page 14)

4
English
Installation
Powering On/Off the Projector
 Turn on the
projector fi rst and
then select the
signal sources.
Lens Cap 1
ON/STANDBY
Power LED
2
Powering On the Projector
1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected.  The Power LED will be Amber.
3. Turn on the lamp by pressing “ON/STANDBY” button
either on the top of the projector or on the remote. The
Power LED will fl ash green.
The startup screen will display in approximately 10 seconds.
The fi rst time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
 If you connect multiple sources at the same time, press
the “Source” button on the control panel or direct source
key on the remote control to switch between inputs.