Oricom PIX2000 - Manual (Page 22)

20
Caller ID Service
Note:
1. The “ ” icon will turn on if the call is a missed call.
2. “EMPTY” will be displayed for 2 seconds and return to standby
mode if you have not received any call.
Edit and Dial Call Record
You can edit the call record so as to dial back.
1. When the handset is in standby mode, press key.
2. Press or key to select the desired record.
3. Press key to enter menu.
4. Press or key to select “SELECT”, press key.
5. To insert a digit using the keypad at a desired location. To delete a digit
before the cursor, press key.
6. After editing, take telephone line with the handset, the number will be
automatically dialled out.
Note:
You may edit the number and make the call, but the edited number
cannot be saved in this option.
Save Call Record
1. When the handset is in standby mode, press key.
2. Press or key to select the desired record.
3. Press key to enter menu.
4. Press or key to select “SAVE NUMBER”, press key.
The selected number will be shown, press key, “ENTER NAME”
will be shown and input the desired name. You must input the name,
otherwise the record can’t be saved.
5. Press key to save.
PIX2000 User Guide.indd 章节2:20 PIX2000 User Guide.indd 章节2:20 2009-6-30 17:33:33 2009-6-30 17:33:33