Oki C5250 - Manual (Page 41)

Menu functions> 41
M
EMORY MENU
This menu determines how printer memory is used.
IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. To
change, press ENTER and use +/–
keys to increment 1st octet, then
press ENTER again to move on to
next octet. When 4th octet has been
set, press ENTER again to register
new address.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS xxx.xxx.xxx.xxx Current assigned gateway address.
To change, proceed as above.
INITIALIZE
NIC? EXECUTE Initialises the network hardware.
WEB/IPP ENABLE /
DISABLE
Enables or disables Web config.
facility and Internet Printing
Protocol.
TELNET ENABLE /
DISABLE
Enables or disables Telnet config.
facility.
FTP ENABLE /
DISABLE
Enables or disables communication
via FTP.
SNMP ENABLE /
DISABLE
Enables or disables SNMP protocol.
LAN
NORMAL
/ SMALL
NETWORK MENU
ITEM SETTINGS EXPLANATION
MEMORY MENU
ITEM SETTINGS EXPLANATION
RECEIVE BUF
SIZE AUTO , 0.5MB,
1MB, 2MB, 4MB,
8MB, 16MB
Sets the size of buffer memory for
receiving incoming data. Normally
this is allocated dynamically as
required.
FLASH
INITIALIZE EXECUTE Clears all data from flash memory.