Onkyo HTX-22HDX - Manual (Page 43)

43
Setup —Continued
Volume Setup
This section explains items on the Volume
Setup menu.
■ MaxVolume
With this setting, you can limit the maximum
volume.
The Maximum Volume range is Off, 79 to 30.
The default value is Off.
■ Pon Vol (Power on Volume)
This setting determines what the volume will
be each time the HTX-22HDX is turned on.
The range is Last, Min, 1 to 79, Max. The
default value is Last.
To use the same volume level as when the
HTX-22HDX was last turned off, select Last.
Note:
• The Power On Volume setting cannot be
set higher than the Maximum Volume set-
ting.
HDMI Setup
This section explains items on the HDMI
Setup menu.
■ Audio TV Out
This setting determines whether audio received
by an HDMI input is output by the HDMI
OUT. You may want to change this setting to
On if your TV is connected to the HDMI OUT
and you want to listen to audio from an HDMI
component through your TV’s speakers
instead of the HTX-22HDX’s speakers.
Normally, this should be set to Off.
Off:
HDMI audio is not output (default).
On:
HDMI audio is output.
Notes:
• If On is selected and the signal can be out-
put by the TV, the HTX-22HDX’s speakers
will output no sound.
• When TV Control is set to On, this setting
is set to Auto.
• With some TVs and input signals, no sound
may be output even if On is selected.
• When the Audio TV Out setting is set to
On, or TV Control is set to On, and you’re
listening through your TV’s speakers (see
page 19), if you turn up the volume on the
HTX-22HDX, the sound will be output by
the HTX-22HDX’s speakers. To stop the
HTX-22HDX’s speakers producing sound,
change the settings, change your TV’s set-
tings, or turn down the HTX-22HDX’s vol-
ume.
■ Lip Sync
The Lip Sync function can automatically syn-
chronize HDMI audio and video that’s gotten
out of sync due to the complex digital video
processing being performed by your HDMI-
compatible TV. With HDMI Lip Sync, the
audio delay required to synchronize the audio
and video is calculated and applied automati-
cally by the HTX-22HDX.
Disable:
HDMI lip sync disabled (default).
Enable:
HDMI lip sync enabled.
Notes:
• This function works only if your HDMI-
compatible TV supports HDMI Lip Sync.
• You can check the amount of delay being
applied by the HDMI Lip Sync function on
the A/V Sync screen (see page 43).
■ HDMI control
This function allows -compatible
components connected via  to be
controlled with the HTX-22HDX.
Off:
 disabled (default).
On:
 enabled.
Notes:
• When you change this setting to On and
close the Setup menu, the names of con-
nected -compatible components
and “RIHD On” are displayed on the
HTX-22HDX.