One for All URC-9990 - Manual (Page 39)

SOUND ON/OFF
MOSAIC is set at the factory to emit a beep and blink the LED each time you tap a key. To turn the
beep sound off (or back on), perform the following procedure:
1. On the Device Screen in the upper left corner, tap on Setup. You will see the main SETUP Menu
that greets you and asks,“What would you like to configure? ”
2. Tap on the SYSTEM key. You will see the SYSTEM Menu.
NOTE: To return to a previous menu, tap on the ESC key. To return to last-displayed Device
Screen, press down on ESC or MUTE for at least 2 seconds. For help, tap the ? key.
3. Tap on the SOUND ON/OFF key. You will see the SOUND Menu with the current setting denot-
ed by a thicker outline.
• To turn off the beep sound, tap on the OFFkey. MOSAIC will turn off the beep sound and return
to the System Menu.
• To turn on the beep sound, tap on the ON key. MOSAIC will turn on the beep sound and return
to the System Menu.
NOTE: As an additional low-battery warning, MOSAIC will emit a beep sound even if the
sound is turned off (see page 3).
LCD
UPGRADE
SOUND ON/OFF
LOCK SETTINGS
USER RESET
LANGUAGE
ABOUT
SYSTEM
Welcome to System Setup!
What action
would you like to perform?
Esc ?
Tap on
OFF
ON
SOUND
The sound is currently ON.
Esc ?
38 www.oneforall.com