Onkyo TX-DS787 - Manual (Page 58)

58
Using remote controller
Overview
The RC-390M remote controller is a useful tool to help you
operate the components of your home theater. To do so, first press
the Mode button that corresponds to the device you wish to
control. At this time, the display on the remote controller will
change to show the component that is selected. Then simply press
the desired operation button and the component will operate
accordingly. For example, if you wish to select the CD input
source at the TX-DS787 with the remote controller, first press the
AUDIO/TAPE MODE button to select the TX-DS787 (“AUDIO”
will appear on the display) and then press the CD (INPUT
SELECTOR) button.
Using the remote controller to control each
device
In order to use the remote controller, you must first turn on the
POWER switch at the TX-DS787 so that it enters standby mode.
1. Press the AUDIO/TAPE MODE button.
“AUDIO” appears in the remote controller display.
2. Press the ON button to turn on the TX-DS787
and press the STNBY button to put it back in
the standby mode.
When you press the STNBY button on the remote controller, it
puts the TX-DS787 in the standby state but does not turn it
completely off.
SEND/LEARN indicator
This indicator acts as a guide when commands are programmed
into or sent by the remote controller. It also warns the user when an
error is made or battery power is low.
Controlling the TX-DS787
If “AUDIO” is already appears in the display, proceed to step 2.
1. Press the AUDIO/TAPE MODE button.
“AUDIO” appears in the remote controller display.
2. Press the desired operation button. The
buttons shaded in the figure to the left are the
operation buttons that can be used to control
the TX-DS787.
ON
AUDIO/TAPE
MODE
STNBY
OPEN/CLOSE REC
AUDIO MUTING
DISC TRACK
DVD CD
PH TUN T2 T1
V1
STEREO
1 2 3
6 5 4
7
+ 10 0 ENT
8 9
SURROUND THX DSP
LEVEL + CH SEL Re-EQ
LEVEL – DIMMER
HOME THEATER CONTROLLER
RC-390M
LATE NIGHT
DIRECT DSP
V2 V3 V –
ON
AUDIO/TAPE
MODE
STNBY
VOL
DISPLAY
CH
Re-EQ
LATE NIGHT
DIMMER
SLEEP
AUDIO
LIGHT
TEST
MUTING
LEVEL +
LEVEL –
CH SEL
SEND/LEARN
indicator
INPUT
SELECTOR
buttons
Listening
mode buttons