5) transmitting terminal information data, 5) transmitting terminal information data -19, 5 various settings in the tx setting dialogue box – Oce North America OP1030 User Manual
Page 32
Page 2-19
(5) Transmitting Terminal Information Data
1. If you want to temporarily change the settings (the present settings will be displayed) from those which are currently
designated in the “(2) Sender Information Tab” under “2-4 Default Setting Dialogue Box” on page 2-9, click on the
Sender Information tab in order to access the Sender Information tab.
NOTE: The changes made here will only apply to the present transmission and the corresponding settings will return to
those previously made in the Default Setting dialogue box once that transmission is completed.
2. Refer to “(2) Sender Information Tab” on page 2-9 for more detailed information on the corresponding settings in that
tab.
3. To start the fax transmission, click on the Send button.
To continue the settings for other tabs, click on another tab.
2-5 Various Settings in the TX Setting Dialogue Box