3) machine setting tab, 3) machine setting tab -10, 4 default setting dialogue box – Oce North America OP1030 User Manual
Page 23
Page 2-10
2-4 Default Setting Dialogue Box
(3) Machine Setting Tab
When you want to use a different machine as a fax, use this tab to change the IP address, or the host name, to the
information that is registered in scanner default settings of the desired machine. (Refer to “2. Set-up” in the Operation Guide
for your Network Scanner.)
Sample screen-shot of the
scanner default setting window
If you use the host name, your computer must be under a network environment
controlled by a WINS server or a DNS server.
The host name can be up to 32 one-byte characters in length and made up of any of the
following characters: 0 – 9, A – Z, a – z, - (hyphen/dash) and . (period/dot)