2) f-code based communication, 2) f-code based communication -15, 5 various settings in the tx setting dialogue box – Oce North America OP1030 User Manual
Page 28
Page 2-15
(2) F-Code Based Communication
2. Enter the sub-address and password as it is registered in the destination fax.
• Maximum number of characters that can be entered: 20
• Characters that can be entered: 0 – 9, #, *, and a space (a space can NOT be entered as the first character)
3. Click on the OK button. The TX Setting dialogue box will be displayed once again.
2-5 Various Settings in the TX Setting Dialogue Box
1. Click on the Option button in the Address Setting tab of the TX Setting dialogue box.
The Option dialogue box will be displayed.