Onkyo TXNR1008 - Manual (Page 2)

2
Firmware Update for the TX-NR708/808/1008 & HT-RC270
We are pleased to offer this firmware update for the best possible performance of your AV Receiver.
A firmware update is now available through the Network or USB connections on the NR708/808/1008 & HT-
RC270.
The 10/27/2010 update addresses the following:
1. Stabilizes "Now Initializing" process to activate [NET/USB] mode in a busy network;
2. Improves the playback speed of particular VR (Variable Bit Rate) mp3 files.
3. Changes the timing of volume operation start. (thereby avoiding problems of no sound output after power is
turned on from Standby mode with network control enabled).
The 10/1/2010 update addresses the following:
TX-NR708/808, HT-RC270
1. Stabilizes "Now Initializing" process when in [NET/USB] mode;
2. Completes "Now Initializing" when update is being done in [NET/USB] mode;
3. Improves the retrieval performance in preprogramming of remote controller codes for connected devices;
TX-NR708/808/1008, HT-RC270
1. Stabilizes operation immediately after power is turned on (addresses problem of no sound output after A/V
receiver has been in Standby mode for an extended time with network control enabled);
2. Displays a specific error message when any error occurs during Internet radio playback;
3. Improves audio performance when Audio TV Out is set to On;
4. Stabilizes picture output just after a source component (DVD player, VCR etc) connected via Component
switches the output format between NTSC and PAL;
5. Enhances the operability of NET-related functions;
6. Improves appearance of On-Screen Display.
The latest update includes all prior updates.
We hope you enjoy the improved functionality this update provides to your AV Receiver.