Olympus VP--1 - Manual (Page 35)

E-34
Troubleshooting
* Other than for “Setup” and “Info.”, selection is not per-
mitted unless a signal is input to the projector and an
image or picture is projected.
* There will not be a display unless the personal com-
puter screen is being projected.
An image will not be output unless a video image is
being input.
* Has the transportation insulation sheet been re-
moved?
* Is an obstacle located between the remote control and
the remote control sensor of the main unit?
* Is the remote control out of range for its signal to reach
the sensor?
* Is there strong light or a fluorescent lamp in the vicin-
ity of the sensor?
* Are the batteries weak? Try directing the remote con-
trol toward the remote control sensor from a close
distance and operating it. If there is difficulty in chang-
ing settings, the batteries are weak. Replace the but-
ton battery (CR2025) with new one.
* See the STATUS indicator list.
* When projecting a rather dark image, the brightness
may be uneven in different parts of the image. This is
not a malfunction.
Menu name cannot be se-
lected
Pressing the PIP button
does not display a sub-pic-
ture
Remote control does not
function
STATUS indicator lights or
blinks
Brightness is uneven
Problem Check
Reference
Page
–
E-23(S)
E-9(S)
–
E-14(C)
–
E-9(S)
E-31, 32(S)
–
If the problem is still not solved after checking the aforementioned matters, please contact
Olympus Digital Technical Support.