Olympus VP--1 - Manual (Page 10)

E-9
Button Battery Replacement
Using the remote control for the first time
The battery compartment is fitted with a transportation insulation sheet
at the time of purchase. Pull out the sheet and remove it. The remote
control is now ready for use.
Replacement Method
1
Insert the tip of a ballpoint pen or some other pointed object into the hole of the
battery holder, then pull out to open.
2 Remove the old battery and install a new button battery with (+) side facing
upward in the battery holder.
Purchase a CR2025 type battery for replacement.
3 Insert the battery holder into the remote control and push in until the battery
holder closes with a “click” sound.
CR2025
M
nO
2 - L iCELL 3 VO
LT
S JA
PA
NH
CR2025
CR2025
M nO
2 - L iCEL L 3 V O
LT
S
JA
PA
NH
CR2025
Preparing the Remote Control
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (CR2025) recommended by the manufacturer.
Dispose of used batteries according to your local regulations.