Olympus VP--1 - Manual (Page 17)

E-16
Operating
3
Turning on the projector power
Main unit operation: Press and hold the POWER
button for 1 second.
Remote control operation: Press the POWER
ON button.
4
The POWER indicator changes to a blinking green and lights steadily after about 60 seconds.
The projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
Switch on the power of the connected equipment
Select the input
Main unit operation: Press the SOURCE button.
Remote control operation: Press the desired button from among the input selection buttons.
5
Set up the screen and the projector
See "Projection Distance Table" on Page E- 11(S) for the distance between the screen and the
projector.
Connect the personal computer or video equipment to the projector
Connect the AC IN connector of the pro-
jector and the power outlet using the
supplied power cable.
The POWER indicator will light amber, the cool-
ing fan will rotate at low speed, and the unit will
enter the standby mode.
1
2
6
POWER
AUTO
MEN
U
STATUS
POW
ER
SO
UR CE
QU ICK MEN
U
PC
AUDIO
VIDEO