Olympus VP--1 - Manual (Page 23)

E-22
General Operation
DIGITAL RGB YPbPr
VIDEO S-VIDEO YCbCr
QUICK
CANCEL
MENU
ASPECT AUTO
Image of the Personal Computer
(when selecting digital RGB or analog RGB)
Each press of the ASPECT button advances the selection one
step in the sequence of Auto
→ Direct → Real, and then repeats.
Auto ............ Automatically enlarges or reduces the image to project a
full screen in a ratio of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the maxi-
mum displayable size
Real ............ Projects the input signal without pixel conversion
Selection of Aspect Ratio
This function selects horizontal and vertical picture proportions of the input signal.
Press the ASPECT button while viewing the projected image and select the aspect ratio.
Image of the Video Equipment
(when selecting VIDEO, S-VIDEO, YCbCr, or YPbPr)
Each press of the ASPECT button advances the selection one step in the sequence of Auto
→ Wide
→ Zoom, and then repeats.
Auto ............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the
boundaries of the screen. The top and bottom of the 16:9 image becomes black.
Wide ........... Projects to fill the full width with the entire image at 16:9. (This feature is used to project a squeezed
image in a proper aspect ratio.)
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen. (Portion that extend off screen is cut.)
Input Signal Auto Direct Real
The setting is higher than
the display resolution of
the projector.
The setting is lower than
the display resolution of
the projector.
Aspect ratio selection Auto Wide Zoom
4:3 screen
16:9 screen
Note
Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in
a venue such as a coffee shop or hotel and projecting a 4:3 screen in wide mode or leaving a squeezed screen
as a compressed image raises concern about the infringement of copyright rights which are protected by
copyright law.