Onkyo TX-SE550 - Manual (Page 26)

26
Recording a source
Make all connections between the tape deck and the receiver as
shown in the “Audio equipment connections” diagram (page 6).
1. Insert a blank tape into the tape deck.
2. Press the input selector button for the source you want to
record.
•
If you select DVD, VIDEO-1 or VIDEO-2, only the audio will
be recorded.
•
If you select FM or AM, set the tuner to the station you want to
record.
3. Set the tape deck in recording mode. Start playing the
source.
Set the proper recording level using the controls on the tape
deck.
•
Please read the corresponding instruction manuals for more
information on how to operate the corresponding equipment.
If the tape deck has three heads, the signal just recorded can be
monitored:
Press the TAPE (MONITOR) button. The TAPE MONITOR indi-
cator appears on the display.
To stop monitoring, press the TAPE (MONITOR) button again.
The TAPE MONITOR indicator turns off.
•
You cannot use the monitor function with the MULTI-CH
INPUT button turned on.
•
Refer to the tape deck’s instruction manual for more details.
Recording an audio source
Monitoring
Tape deck
(TAPE)
Turntable
CD player
DVD
VCR, VDP
1·3 3
2
BASS TREBLE
C D PHONES
Re-EQ
A/V KARAOKE CONTROL RECEIVER TX-SE550
AM FM DVD PHONO 1 VIDEO 2 VIDEO TI CH INPUT MUL TAPE( ) MONITOR
CLEAR
MEMORY FM MUTE / MODE SPEAKERS A B MIDNIGHT THEATER SURROUND MODE
MASTER VOLUME
OFF ON
POWER
STANDBY/ON
ECHO LEVEL
3-D BASS
MIC LEVEL KARAOKE
MIC 1 2
1
MAX MIN
2
MAX MIN MAX MIN
KEY CONTROL VOCAL CANCEL SCAN GROUP DIRECT TUNING
STANDBY
1 2 3 4 5 6 7 8 9 0 /10 TUNING PARAMETER CONTROLLER
PARAMETER SELECTOR
1
C D AM FM
DVD
PHONO
1 VIDEO 2 VIDEO
2
TAPE( ) MONITOR