beautypg.com

Important safeguards, Read instructions – all the safety and operatin, Retain instructions – the safety and operating – Onkyo TX-SE550 User Manual

Page 2: Heed warnings – all warnings on the appliance a, Follow instructions – all operating and use ins, Water and moisture – the appliance should not b, Carts and stands – the appliance should be used, 6a. an appliance and cart combina6a. tion should b, Wall or ceiling mounting – the appliance should, Ventilation – the appliance should be situated

background image

2

Important Safeguards

1.

Read Instructions

– All the safety and operating instructions

should be read before the appliance is operated.

2.

Retain Instructions

– The safety and operating instructions

should be retained for future reference.

3.

Heed Warnings

– All warnings on the appliance and in the

operating instructions should be adhered to.

4.

Follow Instructions

– All operating and use instructions

should be followed.

5.

Water and Moisture

– The appliance should not be used near

water – for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, and
the like.

6.

Carts and Stands

– The appliance should be used only with a

cart or stand that is recom-
mended by the manufacturer.

6A. An appliance and cart combina-

tion should be moved with care.
Quick stops, excessive force,
and uneven surfaces may cause
the appliance and cart combina-
tion to overturn.

7.

Wall or Ceiling Mounting

– The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

8.

Ventilation

– The appliance should be situated so that its loca-

tion or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the ventilation
openings; or if placed in a built-in installation, such as a book-
case or cabinet that may impede the flow of air through the
ventilation openings, there should be free space of at least 20
cm (8 in.) and an opening behind the appliance.

9.

Heat

– The appliance should be situated away from heat

sources such as radiators, heat registers, stoves, or other appli-
ances (including amplifiers) that produce heat.

10.

Power Sources

The appliance should be connected to a

power supply only of the type described in the operating
instructions or as marked on the appliance.

11.

Polarization

– If the appliance is provided with a polarized

plug having one blade wider than the other, please read the fol-
lowing information:
The polarization of the plug is a safety feature. The polarized
plug will only fit the outlet one way. If the plug does not fit
fully into the outlet, try reversing it. If there is still trouble, the
user should seek the services of a qualified electrician. Under
no circumstances should the user attempt to defeat the polar-
ization of the plug.

12.

Power-Cord Protection

– Power-supply cords should be

routed so that they are not likely to be walked on or pinched by
items placed upon or against them, especially near plugs, con-
venience receptacles, and the point where they exit from the
appliance.

13.

Cleaning

– The appliance should be cleaned only as recom-

mended by the manufacturer.

14.

Power Lines

– An outdoor antenna should be located away

from power lines.

15.

Nonuse Periods

– The power cord of the appliance should be

unplugged from the outlet when left unused for a long period
of time.

16.

Object and Liquid Entry

– Care should be taken so that

objects do not fall and liquids are not spilled into the enclosure
through openings.

17.

Damage Requiring Service

– The appliance should be ser-

viced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18.

Servicing

– The user should not attempt to service the appli-

ance beyond that described in the operating instructions. All
other servicing should be referred to qualified service person-
nel.

19.

Outdoor Antenna Grounding

– If an outside antenna is con-

nected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and
built up static charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure, ground-
ing of the lead-in wire to an antenna-discharge unit, size of
grounding conductors, location of antenna-discharge unit, con-
nection to grounding electrodes, and requirements for the
grounding electrode. See Figure 1.

FIGURE 1:
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

ELECTRIC
SERVICE
EQUIPMENT

GROUND
CLAMP

ANTENNA
LEAD IN
WIRE

S2898A

PORTABLE CART WARNING

S3125A