Oki 5950 - Manual (Page 168)

|
OKIFAX 5750/5950 158
Memory Dump
! Memory Dump displays the contents of the T.38 board’s
memory. It is not a procedure you will normally
perform.
The T.38 facsimile machine cannot be used for
communications while the upgrade is being performed.
When is DHCP set to ON, you cannot upload more than
one machine at a time on the same broadcast domain.
To perform a Memory Dump,
1 Start the IPFax Console software.
On the desktop, select Start – Programs – IPFAX console.
2 Connect the software to the T.38 device you want to
work with.
3 From the top tool bar, select Maintenance.
4 From the drop down menu, select Memory Dump.
5 The Memory Dump screen displays.
6 In the Read Address (Hex) box, use a hexadecimal
number to enter the top address of the memory you wish
to dump.
7 Click Read Memory.
8 The dump contents are displayed on the screen.
The dump contents are 1 Kbyte of data from the top
address.
Click Back to move down from the top address in
400[Hex] increments.
Click Next to move up from the top address in 400[Hex]
increments.
Click Save in a file to save the display contents in a file
on the PC.
9 Click Close to end the memory dump.