Oki 5950 - Manual (Page 163)

|
Feature Set Guide: English 153
Changing the Password
! The password is IPFAX until you change it.
IPFAX is all upper case, single-byte characters.
To change the password,
1 Start the IPFax Console software.
On the desktop, select Start – Programs – IPFAX console.
2 Connect the software to the T.38 device you want to
work with.
3 From the top tool bar, select Maintenance.
4 From the drop down menu, select Change Password.
5 The Change Password screen displays.
6 Enter the old password in the Old Password field.
The password is IPFAX until you change it.
IPFAX is all upper case, single-byte characters.
7 Enter the new password in the new Password field.
! A password MUST be entered; you cannot leave this
field blank.
8 Confirm the new password by entering it in the Type in
New Password again field.
9 Click OK to download the new password to the device.
10 The Change Password screen closes.
! Be sure to record any password you program. Keep the
record in a safe place. If you forget a password, refer to
the “Forgot the Password?” of the T.38 section of the
Feature Set Guide.