Oki 5950 - Manual (Page 129)

|
Feature Set Guide: English 119
Operation
You can send or receive transmissions using T.38 protocol.
! Your Installer (Network Administrator) must program
the Address Table via the Console Software before you
can send or receive using T.38 protocol.
Sending a T.38 Fax
! When you enter the alias (destination), and you are
using T.38, you can enter the numbers 0 through 9 and
the symbols # and *. Any other characters or symbols
will be ignored.
! Your Installer (Network Administrator) must program
the Address Table via the Console Software before you
can send or receive using T.38 protocol.
! If you want to use a One Touch number, it must be
programmed before attempting T.38 transmission.