Olympus WS 700M - Manual (Page 67)

67
6
EN
Co
nnec
ting
t
o
y
o
ur
P
C
Connecting to your PC
1 Boot the PC.
2 Slide the USB connector slide
lever in the direction indicated
by the arrow to eject the USB
connector out of the recorder.
3 Make sure that the recorder is
stopped, and connect to the PC’s
USB port.
Windows:
When you open [My Computer], it
will be recognized by the drive name
of the product name.
Macintosh:
When you connect the recorder to a
Mac OS, it will be recognized by the
drive name of the product name on
the desktop.
• [Remote (Storage)] is appeared
on recorder if the USB cable is
connected.
Notes
• Refer to the user’s manual for your PC
regarding the USB port on your PC.
• Be sure to push the cable connector all
the way in. Otherwise, the recorder may
not operate properly.
• Use the supplied USB extension cable
depending on situations.
• When connecting the recorder through
an USB hub the operation may become
unstable. In such cases, refrain from using
a USB hub.
• Do not use USB extension cables other
than the supplied cable.
Using cables from other manufacturers
could result in damage to the recorder.
Do not use the supplied USB extension
cable with devices from other
manufacturers.
For WS-710M,
WS-700M only
For WS-600S only