Olympus WS 700M - Manual (Page 11)

11
1
EN
Power supply
Po
we
r s
u
p
p
ly
2 Insert size-AAA battery,
observing the correct
= and
- polarities.
3 Close the battery cover
completely by pressing to the
direction A, then sliding to the
direction B.
Notes
• Manganese batteries may not be used in
this recorder.
• When changing batteries, AAA alkaline
batteries or Olympus Ni-MH rechargeable
batteries are recommended.
• Be sure to stop the recorder before
replacing the batteries. Unloading the
batteries while the recorder is in use may
cause a malfunction such as corrupting
the fi le, etc. If you are recording into a fi le
and the batteries run out, you will loose
your currently recorded fi le because the
fi le header will not be able to close. It is
crucial to change the batteries once you
see only one Hash mark in the battery
indicator.
• If it takes longer than 1 minute to replace
the dead batteries or if you take the
batteries in and out repeatedly at short
intervals,
you may have to redo the
battery and time settings. In this case,
the [Battery] screen will appear. For
more details, refer to “Battery settings”
(
☞ P.12).
• Remove the batteries if you are not going
to use the recorder for an extended
period of time.
• When replacing rechargeable batteries,
be sure to use Ni-MH rechargeable
batteries (optional). The use of other
manufacturers' products can damage the
recorder and should be avoided.