Olympus WS 700M - Manual (Page 35)

35
3
EN
Pla
yback
Playback
+− button
OK
`/MENU
button
SCENE/INDEX
button
1 While the recorder is during
recording mode or playback
mode, press the SCENE/INDEX
button.
• A number appears on the display and
an index mark or temp mark will be
placed.
Setting an index mark or a temp
mark
If index marks and temp marks are placed,
you can quickly find a location you want to
listen to in fast forward and fast rewind and
when cuing a file. Index marks can only be
placed on files created by Olympus voice
recorders, but temp marks can be placed
instead to temporarily remember desired
locations.
Clearing an index mark or a temp mark
1 Locate the index or temp mark
you want to clear.
2 Press the
9 or 0 button to
select the index or temp mark to
erase.
3 While the index or temp number
appears for approximately 2
seconds on the display, press the
ERASE button.
• The index or temp mark is erased.
• Index or temp numbers after the
erased index or temp number will
automatically move up.
Notes
• Temp marks are temporary markings, so
if you transmit a fi le to the PC, or move
it with a PC, they will be automatically
erased.
• Up to 16 index and temp marks can be
set in a fi le. If you try to place more than
16 index or temp marks, [Index Full]
message will appear for index marks, and
[Temp Mark Full] for temp marks.
• Index or temp marks cannot be set or
erased in a locked fi le (
☞ P.47, P.49).
• Even after an index or temp mark is
placed, recording or playback will
continue so you can place index or
temp marks in other locations in a
similar manner.