Olympus DS-3000 - Manual (Page 12)

12
Setting Time/Date
If you have set the time and date, information as to when an audio file is recorded is stored
automatically with that file. The time and date should be set to ease audio file management tasks.
The time and date setting is also needed to perform the alarm playback function (
→
P.34, 35).
The hour indicator will flash automatically when you load batteries before using the recorder for
the first time, or after the recorder hasn’t been used for a long time. To adjust the time, follow the
steps described below.
1 Repeat steps
1
and
2
to set the
time and date:
Time and date setup proceeds in the
order of hour, minute, year, month, and
date.
1
Press the FF/+ button or REW/–
button to set a value.
2
Press the REC/SET button to accept
the value.
2 Press the STOP button to end.
This completes the time setup procedure.
·····································································
Notes
• If you press the STOP button during the setup
operation, the clock will use the items that were
set to that point.
• Each press of the NEW button during setting
toggles the display between the 12-hour and 24-
hour system.
Setting T
ime/Date
Time/Date Setup Screen
FF/+ or REW/–
button
(alters a choice)
REC/SET
button
(accepts a
choice and
moves on to the
next item)
STOP
button
INDEX
STOP
FOLDER
/MENU
PLAY
ERASE
Hour
Month
Minute
Year
Date