Olympus DS-3000 - Manual (Page 11)

11
Replacing Batteries
The battery indicator on the display changes
as the batteries lose power.
→ → →
When the batteries are too weak, the recorder
shuts down and “BATTERY LOW” appears on
the display.
When
appears on the display, replace
the batteries as soon as possible. AAA alkaline
batteries* are recommended.
* The two AAA alkaline batteries provide
approximately 11 hours of continuous recording and
playback. Battery life depends on the operating
environment and other conditions.
Notes
• Be sure to stop the recorder before replacing
the batteries. Unloading the batteries while the
recorder is recording, erasing or otherwise
accessing an audio file may corrupt the file.
• Be sure to replace both batteries at the same time.
• Never mix old and new batteries, or batteries
of different types and/or brands.
• If it takes longer than 3 minutes to replace dead
batteries, you may have to reset the time when you
load fresh batteries.
• Remove the batteries if you are not going to use
the recorder for an extended period of time.
Using the AC Adapter
“BATTERY
LOW”
Replacing Batteries/Using the
AC
Adapter
Plug the optional AC adapter (Olympus Model
A321 or A322) into household power outlet and
connect the power plug to the recorder’s power
connector (DC 3 V) as shown in the illustration.
Do not connect the AC adapter to the recorder
during recording. Always stop recording before
connection. Otherwise it may not be possible
to play back the voice data being recorded.
FOLDER /MENU
INDEX
PLAY
STOP
ERASE
• Stop the recorder before disconnecting
the AC adapter.
• When not using the recorder, always
disconnect the AC adapter from the power
outlet.
• Use only the correct power supply voltage
as indicated on the adapter.