Optiview G0521 User Manual
Page 64
DVR Server Manual ver.5.05/rel.092507
60
First, select the number of display partition from the main screen:
. Note that
each partition represent the number of camera you will be connected into the DVR server. Maximum
connection is 16 cameras. It is limited due to the fact
that your local PC‘s CPU will be processing all
these live video streams and could slow down your local PC performance.
If the total number
of the DVR Server‘s channel (camera capacity) is more than that of the
channels that you currently selected in partition mode, you can use
button to display DVR
Server‘s video in sequence. Pressing button
will switch full screen mode and
Right-Single-Click image can back to normal mode.
5.2.2 Connection/Record status
This icon indicates the current connection and their record status:
Gray: Not connected;
Navy blue: Connected with no recording;
Green: Connected with recording of video on your local hard drive.
You can change the record status by pressing corresponding number button or change status of
all connections at the same time by pressing
button.
5.2.3 Partition mode
You can set the partition mode by pressing corresponding button on the right of main interface.
It has follow partition modes:
——1partition mode;
——4partition mode;
——6partition mode;
——9partition mode;
——10partition mode;
——16partition mode.
5.2.4 PTZ Control
Most functions of PTZ control are the same as the
5.2.5 Quit program
Press
button to shut down the IE Client.