Olympus Digital Voice Recorder DS-3000 - Manual (Page 9)

9
Inserting and Ejecting SmartMedia cards
Inserting and
Ejecting
SmartMedia cards
Inserting SmartMedia cards
Insert the SmartMedia card into the slot as
shown below.
1 Insert the SmartMedia in the
correct direction.
Push the SmartMedia card fully into
position.
2 Set the POWER/LOCK switch to
ON.
SmartMedia inserted fully into the
slot
When you set the POWER/LOCK switch to the
ON position, “PLEASE WAIT” flashes on the
display.
SmartMedia not inserted fully into the
slot
When you set the POWER/LOCK switch to the
ON position, “INSERT CARD” flashes on the
display for 2 seconds. Pressing any button with
no SmartMedia card inserted causes “INSERT
CARD” to appear again.
Push the SmartMedia card fully into position.
Notes
• If an unformatted SmartMedia card is inserted,
“FORMAT YES?” will display automatically. Format
the SmartMedia card (
→
P.26).
• Never use any SmartMedia card other than one that
has been formatted on this unit or on a CAMEDIA
series Olympus digital camera (
→
P.4).
Bottom side
of SmartMedia
projecting from
the slot
INDEX
PLAY
STOP
1
POW
ER
/LOCK
ON
OFF
2
contact area
SmartMedia
slot