beautypg.com

Moving files across folders – Olympus Digital Voice Recorder DS-3000 User Manual

Page 21

background image

21

Mo

ving Files Acr

oss Folders

7

Press the FF/+ or REW/– button
to set the hour.

8

Press the REC/SET button to
accept the hour.

The minute indicator flashes.

9

Press the FF/+ or REW/– button
to set the minute.

10

Press the REC/SET button to
accept the minute.

11

Press the STOP button to close
the menu.

An alarm tone will sound at the scheduled time.
Press any button while the alarm sounds to play
the file you associated with the alarm.

Notes

• The alarm playback function can be set for only one

file at a time.

• The alarm will sound at the scheduled time every

day unless the alarm playback setting is cleared.

• The alarm will sound for 5 minutes and then stop.
• If you are using the recorder at the scheduled time,

the alarm will sound after you’re done.

• The alarm will sound at the scheduled time even if

you are holding the recorder. The recorder begins
to play the file associated with the alarm when you
press any button.

• The alarm playback setting is cleared if the selected

file is erased or the SmartMedia card is ejected.

• The alarm won’t launch at the scheduled time if the

POWER/LOCK switch is set to OFF.

Moving Files Across
Folders

A recorded file can be transferred from one
folder to another. The file is added at the end of
existing files in the destination folder.

1

Choose the file you want to move.

(See Steps 1 and 2 in “Playing” (

P.15).)

2

Press the PLAY button to play the
file.

3

Press the FOLDER/MENU button
while playing the file.

“INSERT REC?” appears on the display.

4

Press the FOLDER/MENU button
once again to select “FILE MOVE?.”

5

Press the REC/SET button.

The destination folders blink on the
display.

6

Press the FF/+ or REW/– button to
choose a destination folder.

7

Press the REC/SET button to accept
the chosen destination folder.

The file is moved.

Notes

• If the destination folder is full (a maximum of 199

files), “FOLDER FULL” appears on the display and
files cannot be transferred to it.

• The file transfer process is aborted if you press the

STOP button or leave the recorder idle for 8 seconds
after you choose a destination folder.

• Files cannot be transferred from one folder to another

on a SmartMedia card with a write-protect seal
attached to it.

Alarm Pla

ybac

k Function

This manual is related to the following products: