Olympus Digital Voice Recorder DS-3000 - Manual (Page 27)

27
Hold
All operation buttons are disabled. This feature
is useful when the recorder has to be carried in
a bag or pocket.
Setting the HOLD switch to the HOLD
position.
When the recorder is in hold mode, the time
shows on the display.
Remember to reset the HOLD switch when
using the recorder. Setting the HOLD switch to
the HOLD position locks the recorder. All buttons
are disabled.
Reset
If the display or the recorder acts strangely,
lightly press the reset button in the battery
compartment with the tip of a ballpoint pen or a
similar object.
Notes
• Do not use a sharp object such as a needle.
• The time/date setup process launches automatically
when you press the reset button. Set the time and
date again (
→
P.11).
• Audio data is not erased when the recorder is reset.
Press the
FOLDER/MENU button
for 1 second or longer
AUTHOR ID
WORK TYPE
: Press the FF /+ or
REW/– button
REC MODE
LOCK
ALARM
TIME & DATE
FOLDER NAME
FORMAT
BEEP
Notes
• If you press the STOP button, the REC/SET button,
or the FOLDER/MENU button during a menu setup
operation, the recorder will stop and apply the items
that were set to that point.
• The recorder will stop if you leave it idle for 3 minutes
during a menu setup operation, when a selected item
is not applied.
Menu List
Hold/Reset/Menu List