Olympus C-1 - Manual (Page 72)

6
Pl
ay
back
72
Recording sound
Sound can be added to a still picture that you have already taken. (This is
known as “after-recording”.) You can also re-record over the sound that
has already been recorded. Total recording time per picture is
approximately 4 seconds. Select the still picture to which you want to add
sound.
Top menu [MODE MENU] [PLAY] [R] g“Menus” (P.12)
1
Press Y to display [START].
2
Aim the camera microphone
toward the sound you want to
record and press e to start
recording.
• The [BUSY] bar is displayed during
recording.
Note
• If the microphone is farther than 1 m (3.3 ft.) from the subject, sound may not
be recorded properly.
• If you re-record the sound, the original sound is erased.
• You may not be able to record sound when there is insufficient card memory
(the [CARD FULL] message is displayed).
• Sound recording may pick up camera noises, such as button operation or
shutter movement.
• Once sound is added to a picture, it is not possible to erase only the sound. In
this case, make a re-recording with silence.
INFO
EDIT
CARD
SET
PLAY
START
Microphone