Olympus C-1 - Manual (Page 47)

5
Ad
di
tio
n
al sh
o
o
ti
ng
fu
ncti
on
s
47
Sequential shooting
This function allows you to take a succession of still pictures (4 pictures in
[HQ] mode) by keeping the shutter button pressed.
As you can choose the best picture from a series of sequential shots, you
are recommended to use this mode when photographing a moving
subject.
o Shoots 1 frame at a time when the shutter button is pressed. (Normal,
single-frame shooting mode)
j Shoots a succession of still pictures by keeping the shutter button
pressed. The focus, exposure and white balance are locked at the first
frame.
Top menu [MODE MENU] [CAMERA] [DRIVE]
g“Menus” (P.12)
1
Select [j] and press e.
2
Take the picture.
• Press the shutter button fully and keep it
pressed. The camera will take pictures
in sequence until you release the button.
Note
• Sequential shooting ([j]) is not available in the following situations.
During panorama shooting or two-in-one picture shooting.
When G, U, W, S, or X is selected for the scene mode.
• If the battery power is low and the battery check blinks during sequential
shooting, shooting stops and the camera starts saving the pictures you have
taken. Whether or not all of the shots are saved depends on how much battery
power remains.
• [ !] is not available when [j] is set. If you select [j] when [!] is set, the
flash setting automatically switches to [AUTO].
DRIVE
ISO
DIGITAL ZOOM
AF MODE
CARD
SET
CAMERA
ESP/